Kamis, 16 Februari 2012

Cara mengatasi error NTLDR wind Xp

Kadang menemui komputer Windows XP kita tidak bisa booting lagi muncul pesan error “NTLDR is Missing“. ini terjadi karena hilang atau corrupt file-file berikut :
NTLDR
Ntdetect.com

boot.ini
Untuk mengatasi error “NTLDR is Missing” bisa dilakukan dengan panduan yang diberikan dari pihak Microsoft. Cara ini telah saya coba sendiri dan terbukti. panduannya silahkan diterjemahkan sendiri OK !
Microsoft : Generally there are 2 methods to resolve this NTLDR issue.
A. Manual File Re-Patching
This method attempts to copy and replace the corrupted file from the Windows Installation disc to your hard disk. To start, follow these steps:
1. Insert the Windows XP CD into your computer as default boot up media.
2. Enter Windows Recovery Console
3. At the command prompt, assuming drive D refers to your CD Drive, type in the following and hit Enter:
Press Y when prompted to overwrite any existing file. * copy D:\i386\ntldr C:\
* copy D:\i386\ntdetect.com C:\
4. Restart the computer
If the error message still persist, it is likely that your boot.ini file is corrupted. Try to fix your corrupted boot.ini file instead. Follow the next step.
B. Manually Editing the Boot.ini File
1. Boot from your Windows XP CD in your computer
2. Enter Windows Recovery Console
3. Type in: type c:\Boot.ini
This command checks for a valid Boot.ini file. If your boot file is working fine, you should see like the following:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=”Microsoft Windows XP Professional” /fastdetect
4. If you receive the following error messages instead of the above message being displayed, your boot.ini file is corrupted or missing:
* The system cannot find the file or directory specified
* File not found – boot.ini
5. To write a new boot.ini file, follow these steps:
* Type in: edit.com
The MS-DOS editor will launch.
* Type in the following and save it as a boot.ini
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=”Microsoft Windows XP Professional” /fastdetect
IMPORTANT: partition(1) refers to your first partition of your hard disk which Windows is typically installed on. You may need to change the value if Windows is installed in a different partition.
6. Reboot your computer and the problem should be resolved.
sumber: Lihat Di Sini
 
Solusi LAIN disini : http://windowsrecoveryvirus.com
 

0 komentar:

Poskan Komentar

Related Posts Plugin for WordPress, Blogger...